2018 Befco Cyclone C50-RD5H
Call for Price
Rear discharge three spindle grooming mower
20-50 HP (15-37 KW)
- Highly engineered & rugged gearbox with cooling fins.
- Spiral gears guarantee strength and quietness.
- Cutting heights: from 1" to 5".
- Front & rear tractor mounting.
- 4 rubber swivel tires with bearings to guarantee a perfectly level cut.
- Stamped steel reinforced wheel arm attached by 8 bolts for maintaining a consistent cutting height.
- Floating 3 point linkage, cat. 1.
- 8 gauge reinforced mower deck.
- Spindle shafts greased from the top for easy service.
- Safety chain shield standard.
- Two heavy duty reinforced belts (SPBX).
- Heavy duty, one piece, balanced steel pulleys.
- Heavy duty shielded PTO shaft (1 3/8" ASAE cat. 3).
- Stamped steel wheel yokes.
- High blade tip speed.
- Precise blade overlap.
- Choice of 4 different types of blades: mulching, high lift, standard and low lift
- Front antiscalping roller available
- Spacers provide for quick & easy height adjustment
- Model: C50-RD5H
- HP: 20-50
- Working width: 60 in.
- Overall width: 62 in.
- Weight lbs: 550
- Ship lbs: 665
- Rotor rpm: 3,210
- Blade tip speed (ft/min): 16,929
- # of blades: 3
- Cutting height: 1 in.-5 in.
- # Belts & type: 2 SPBX
- Driveline 1 3/8": ASAE cat. 3
- Hard Tires: 10 in.x3.2 in.
NOTES:WARNING: When using a quick hitch on a PTO driven implement, always ensure there is proper overlap prior to use. If there is not the minimum 6" overlap, do not use. Contact your dealer to purchase a longer driveline. NOTE: 1000 RPM gearbox available upon request.
- Working Width
- 60 in.
- 62 in.
- 550 lb.
- Recommended HP
- 20-50 hp