2018 Befco Cyclone C70-110H
Call for Price
Heavy duty rear discharge three spindle grooming mower
30-70 HP (22-52 KW)
- Highly engineered & rugged gearbox with cooling fins.
- Cutting heights: from 1.3" to 5.3".
- Front & rear tractor mounting.
- 4 rubber swivel tires with bearings to guarantee a perfectly level cut.
- Stamped steel reinforced wheel arm attached by 8 bolts for maintaining a consistent cutting height.
- Floating 3 point linkage, cat. 1.
- Front antiscalping roller standard.
- 8 gauge reinforced mower deck.
- Spindle shafts greased from the top for easy service.
- Two heavy duty reinforced belts (CX).
- Heavy duty, one piece, balanced steel pulleys.
- Heavy duty shielded PTO shaft (1 3/8" ASAE cat. 4).
- Safety chain shield standard.
- Stamped steel wheel yokes.
- High blade tip speed.
- Precise blade overlap.
- Six free swinging kick back blades.
- Model: C70-110H
- HP: 40-70
- Working width: 110 in.
- Overall width: 112 in.
- Weight lbs: 1,390
- Ship lbs: 1,420
- Rotor rpm: 1,562
- Blade tip speed (ft/min): 14,998
- # of blades: 6
- Cutting height: 1.3 in.-5.3 in.
- # Belts & type: 2 CX
- Driveline 1 3/8": ASAE cat. 4
- Hard Tires: 12 in.x4 in.
NOTES:WARNING: When using a quick hitch on a PTO driven implement, always ensure there is proper overlap prior to use. If there is not the minimum 6" overlap, do not use. Contact your dealer to purchase a longer driveline.
- Working Width
- 110 in.
- 112 in.
- 1390 lb.
- Recommended HP
- 40-70 hp